CTS Cement Manufacturing Corp. – manufacturer of Rapid Set® professional-grade cement products and Komponent® shrinkage-compensating cement for concrete repairs and new construction projects – announces a partnership with Concure Systems to provide the ultimate performance in moisture protection and Komponent® shrinkage-compensating jointless floor slabs.

Facilities specifying moisture sensitive floor coverings or seamless flooring systems can now benefit from the best of both worlds – combining integral moisture mitigation, 90-95% fewer joints, and dimensional stability that prevents shrinkage-cracking, spalling and edge curling.

Integrating these two innovative technologies allows you to minimize or eliminate control joints and saw cutting, prevent joint related flooring failures, and eliminate topical moisture remediation systems. This solution can eliminate delamination concerns for moisture sensitive floor coverings or resinous floor systems and prevent reflective cracking and costly joint failures – all while improving operational efficiencies and overall aesthetics.

Specifying an integral concrete slab solution using Komponent and Concure means construction costs can be reduced, project timelines accelerated, and long-term maintenance costs minimized. These innovative, proven technologies offer complementary benefits and ensure maximum performance in industrial, commercial, and institutional facility designs.

Concure’s Lifetime Warranty for preventing moisture vapor emissions (MVE) challenges helps protect the owner’s capital investment and provides peace of mind for long-term performance.

The CTS and Concure Systems teams are happy to assist with a comprehensive cost comparison/value estimator for cast-in-place floor slab projects. Specification assistance is available upon request. Contact us today for more information. CTS Cement (800) 929-3030  or www.CTScement.com  |  Concure Systems  (480) 820-7171  or www.concuresystems.com

About Concure Systems

Concure Systems is the number one industry leader in concrete vapor barriers and moisture mitigation. As flooring and concrete moisture prevention systems specialists, Concure Systems provides up-to-date, professional consulting for successful flooring installations, avoiding potential moisture vapor emissions failures. For more information, contact about Concure Systems, visit www.concuresystems.com

About CTS Cement Manufacturing Corp.

CTS Cement Manufacturing Corporation manufactures Rapid Set professional-grade cement products and Komponent shrinkage-compensating cement for concrete repairs and new construction projects. Contractors, owners, engineers and architects choose CTS products to eliminate problems they have with other concrete repair materials, and to save time and money when superior durability is required and aesthetics are essential. For more information about CTS Cement’s Rapid Set and Komponent product lines, please visit www.ctscement.com.

Read more

CONCURE SYSTEMS IS A PROUD PARTICIPANT IN ACI’S “PROJECT OF THE YEAR” FOR THE NEW DAVITA WORLD HEADQUARTERS IN DENVER, COLORADO!!

                                                                                                    DETAILS FORTHCOMING…

In a tough economy where every dollar counts there is a continued strain on architects, engineers and general contractors to address a problem that many refused to believe existed not too long ago, moisture vapor emissions (mve). Mve leads to floorcovering failures that are extremely costly to remediate and many times leave the end user to fend for themselves as many of the recent entries into the mve control segment have neither the experience, performance level and most importantly, the warranty to make a difference.

Concure systems has from day one been the answer to flooring failures and was designed to solve floorcovering failures due to mve. We are not a product that was designed for some other application and plugged as a solution to flooring problems. The market segment is now recognized as a viable one because of all the bad experiences architects, structural engineers, general contractors and end users have gone through and, in many cases, caused each to pony up with money to resolve the issues. Those that have had the experience know the value of our system as we are fully warranted and cover any manufacturers floor covering installed on a Concure slab. Our proactive product, Concure admixture, requires no labor and is a fraction of the cost of addressing after the fact. It is a safeguard and relatively inexpensive insurance policy versus “rolling the dice” on a product that is new to the market and unproven.

Architects, engineers, general contractors and end users typically want the best product for the least amount of money. Concure systems has a full array of products that are tried and true, are integral in the concrete and are not a band-aid!!! With a reputation on the line and a potential problem to solve why would anyone specify a product that has relatively no warranty?? Please be cautious and read the fine print on what you are specifying. Most times you will find you are not comparing an apple to an apple and are left with the same potential liability you had as if you didn’t address mve at all.

Don’t you owe it to yourself to read the warranty of a product you are potentially going to use to control moisture? Don’t you owe it to yourself to investigate how long they’ve been in the market.? Don’t you owe it to yourself toprotect your company’s reputation??? Concure systems will gladly provide side by side analysis of Concure versus any other product. Don’t you owe it to yourself and your client??????

ASPEN SCHOOL OF MUSIC

5 BEST USA BUILDINGS OF THE YEAR 2013!!!

CONCURE SYSTEMS IS PROUD TO ANNOUNCE…

 

• THAT WE WERE A MAJOR PARTICIPANT IN ASPEN MUSIC SCHOOL ADDITION TOP 5 BUILDINGS
• ACROSS THE USA. THE DENVER POST – RAY MARK RINALDI (ARTICLE) & DAVID TSANG

(PHOTOGRAPHY) – NAMED ASPEN MUSIC SCHOOL AS ONE OF THE TOP 5 BUILDINGS OF 2013 IN

THE UNITED STATES. HARRY TEAGUE ARCHITECTURE (ASPEN, CO) WAS THE FIRM THAT

DESIGNED THE BUILDING THAT, WHILE USING THE NATURAL LANDSCAPE OF THE ASPEN SLOPES

AS INSPIRATION, ALSO CREATIVELY USED EXISTING SPACE (PRACTICE ROOMS) AS STRUCTURAL

SUPPORT (RETAINING WALLS) IN WHAT IS TRULY A WORK OF ART.

HARRY TEAGUE ARCHITECTS INGENIOUSLY USED INNOVATION IN THE CONCRETE (CONCURE

ADMIXTURE) TO NOT ONLY ESCALATE THE PROJECT SCHEDULE BUT PERMANENTLY ELIMINATE

FLOORING FAILURES DUE TO MOISTURE OUT OF OR THROUGH THE SLAB. IN ADDITION,

CONCURE SYSTEMS 2100 CURE & SEAL WAS USED IN LIEU OF WET CURING TO PROMOTE

FLOORING BOND WHICH ALLOWED ALL OTHER NON-FLOORING TRADES ACCESS ALMOST

IMMEDIATELY TO ELIMINATE DELAYS AND MAINTAIN A TIGHT SCHEDULE.

FLOORING FINISH WAS TEMPERED PLYRON (MASONITE) WHICH FALLS INTO THE CATEGORY OF

MOISTURE SENSITIVE FLOORCOVERING AND PLAYED A BIG ROLE IN THE DECISION TO USE

CONCURE SYSTEMS ADMIXTURE AGAIN DUE TO ESCALATED SCHEDULE.

THE SLABS TESTED OUT ON DARCY SCALE AT 10-9 WHICH IS AN EXCELLENT RELIABLE LONG-

TERM RESULT WITH REGARD TO PERMEABILITY AND SUBSTANTIALLY INCREASED THE OVERALL

CONCRETE STRENGTH FROM ORIGINAL DESIGN.

SHAW CONSTRUCTION HEADED THE PROJECT AS GENERAL CONTRACTOR AND WORKED

DILIGENTLY THROUGH TOUGH CONDITIONS TO BRING THE PROJECT TO FRUITION.